FreeBSD Kurulum Klavuzu :FreeBSD Boot Sistemi
Önceki: Kurulumdan Çıkış
Sonraki: FreeBSD'nin kapatılması
Eger hersey yolunda giderse, aşağıdakine benzer mesajlar alacak, ve en sonunda login bölümüne ulaşacaksınız. Bu mesajları [SCROLL-LOCK] a basıp [PgUp] ve [PgDn] tuşlarını kullanarak görebilirsiniz. Tekrar [SCROLL-LOCK] basarsanız prompt a geri döneceksiniz.
Bütün mesajlar "buffer" yetmezliği nedeniyle görüntülenemeyebilir. Ama sonra dmesg komutu kullanilarak bu boot mesajlarını görebilirsiniz. Aynı şekilde [SCROLL-LOCK] metoduyla yukarı aşağı hareket edebilirsiniz.
Kurulum sırasında kullandığınız kullanıcı
adı ve şifreyle sisteme girin.
(enderunix, gibi). Çok gerekli olmadıkçca root olarak login olmayın.
| Copyright (c) 1992-2000 The FreeBSD
Project. Copyright (c) 1982, 1986, 1989, 1991, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.2-RELEASE #0: Mon Nov 20 13:02:55 GMT 2000 jkh@bento.freebsd.org:/usr/src/sys/compile/GENERIC Timecounter "i8254" frequency 1193182 Hz CPU: AMD-K6(tm) 3D processor (300.68-MHz 586-class CPU) Origin = "AuthenticAMD" Id = 0x580 Stepping = 0 Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX> AMD Features=0x80000800<SYSCALL,3DNow!> real memory = 67108864 (65536K bytes) config> di sn0 config> di lnc0 config> di le0 config> di ie0 config> di fe0 config> di ed0 config> di cs0 config> di bt0 config> di ata1 config> di aic0 config> di aha0 config> di adv0 config> q avail memory = 61083648 (59652K bytes) Preloaded elf kernel "kernel" at 0xc0436000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc043609c. md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <Matrox MGA G200 AGP graphics accelerator> at 0.0 irq 11 isab0: <VIA 82C586 PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C586 ATA33 controller> port 0xe000-0xe00f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 uhci0: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 10 at device 7.2 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered chip1: <VIA 82C586B ACPI interface> at device 7.3 on pci0 ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xe800-0xe81f irq 9 at device 10.0 on pci0 ed0: address 52:54:05:de:73:1b, type NE2000 (16 bit) isa0: too many dependant configs (8) isa0: unexpected small tag 14 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/15 bytes threshold ppi0: <Parallel I/O> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port plip0: <PLIP network interface> on ppbus0 ad0: 8063MB <IBM-DHEA-38451> [16383/16/63] at ata0-master using UDMA33 acd0: CDROM <DELTA OTC-H101/ST3 F/W by OIPD> at ata0-slave using PIO4 Mounting root from ufs:/dev/ad0s1a swapon: adding /dev/ad0s1b as swap device Automatic boot in progress... /dev/ad0s1a: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s1a: clean, 71280 free (472 frags, 8851 blocks, 0.5% fragmentation) /dev/ad0s1f: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s1f: clean, 6976313 free (42785 frags, 866691 blocks, 0.6% fragmentation) /dev/ad0s1e: filesystem CLEAN; SKIPPING CHECKS /dev/ad0s1e: clean, 97952 free (8 frags, 12243 blocks, 0.0% fragmentation) Doing initial network setup: hostname. ed0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255 inet6 fe80::5054:5ff:fede:731b%ed0 prefixlen 64 tentative scopeid 0x1 ether 52:54:05:de:73:1b lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x8 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 Additional routing options: tcp extensions=NO IP gateway=YES TCP keepalive=YES routing daemons:. additional daemons: syslogd. Doing additional network setup: portmap. Starting final network daemons: creating ssh RSA host key Generating RSA keys: Key generation complete. Your identification has been saved in /etc/ssh/ssh_host_key. Your public key has been saved in /etc/ssh/ssh_host_key.pub. The key fingerprint is: 8d:3f:20:3d:61:19:e2:e4:e5:62:ff:88:a0:32:68:e1 root@k6-2.weeble.com creating ssh DSA host key Generating DSA parameter and key. Your identification has been saved in /etc/ssh/ssh_host_dsa_key. Your public key has been saved in /etc/ssh/ssh_host_dsa_key.pub. The key fingerprint is: 31:09:ab:84:2f:c0:30:08:ad:03:38:02:96:9f:bf:f2 root@k6-2.weeble.com. setting ELF ldconfig path: /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib setting a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout starting standard daemons: inetd cron sendmail sshd usbd. Initial rc.i386 initialization: linux. rc.i386 configuring syscons: blank_time screensaver moused. Local package initilization:. Additional TCP options:. Sun Jang 21 21:27:36 EDT 2001 FreeBSD/i386 (k6-2.weeble.com) (ttyv0) login: rpratt FreeBSD 4.2-RELEASE (GENERIC) #0: Mon Nov 20 13:02:55 GMT 2000 Welcome to FreeBSD! Before seeking technical support, please use the following resources: o Security advisories and updated
errata information for all o The Handbook and FAQ documents are
at http://www.freebsd.org/ If you still have a question or problem,
please take the output of bash-2.04$ pwd |
Eger X server ayarlanmış, ve de Default Desktop seçilmişse, X serveri "startx"
yazarak başlatabilirsiniz.
FreeBSD Kurulum Klavuzu :FreeBSD
Boot Sistemi
Önceki: Kurulumdan Çıkış
Sonraki: FreeBSD'nin kapatılması
|